Skip to main content

Home ›  Safety standards

How we keep your site safe

Tree work drops heavy things from height. Here is the paperwork, the gear and the standards we use so nobody gets hurt and nothing gets broken.

Our safety system

Four things we do before a single cut

Read these and compare them with the next quote you get. If a crew cannot show you a SWMS and a current certificate of currency, send them away.

SWMS before the saws start

We write a Safe Work Method Statement for the site, name the high risk activities, and read it with the crew at the tailgate meeting. You can ask for a copy before we book the date.

  • Site specific hazard list: power lines, pools, glass, pets, neighbors
  • Drop zone marked, exclusion tape and a spotter on the footpath
  • Rescue plan named, with a second climber briefed on aerial rescue

PPE we wear on every job

Nobody leaves the truck without the full kit. We inspect it weekly and replace anything cut, cracked or out of date.

  • Cut resistant chainsaw trousers, boots and gloves to ANSI Z133
  • Helmet with visor and Class 5 hearing protection
  • Harness, lanyards and ropes logged, inspected and date stamped

ANSI A300 pruning standard

We prune to ANSI A300 pruning standards. That means correct cut placement outside the branch collar, no flush cuts, no stubs and no topping. City reviewers and insurers both check for it.

  • Reduction cuts to a suitable lateral, never a random heading cut
  • Live crown removal kept inside the limits the standard allows
  • Wounds left clean and unpainted so the tree can seal them

OSHA Florida compliance

We register the job, carry current Florida workers' compensation, and follow OSHA ANSI Z133 rules for tree work near powerlines and traffic.

  • No Go Zone permits and a spotter for work near electrical assets
  • Traffic management plates and signage when we work off the curb
  • Incident and near miss log reviewed monthly with the whole crew

We protect the property too

Most damage on a tree job happens on the ground, not in the canopy. We board the lawn, cover the pool and lower limbs on rope so your paving, your fence and your neighbor's roof stay exactly as we found them.

Read our workmanship guarantee
  • Board and mat the lawn before a grinder or tipper rolls onto it
  • Cover pools, ponds and glasshouses before the first limb comes down
  • Lower limbs on rope over roofs, decks and paving instead of dropping them
  • Protect retained trees with root zone fencing when machinery works nearby
  • Blow, rake and sweep the site, then walk it with you before we invoice

Safety and compliance

Real safety steps behind tree work in Jacksonville

Here are the three controls we run on every job, so your home and our crew stay protected.

  • Arborist holding a Safe Work Method Statement beside a large tree before tree work in Jacksonville

    Control 01

    We plan it in writing first

    We walk the site, mark the drop zones, and file a Safe Work Method Statement you can read before we start tree work in Jacksonville.

  • Climbing ropes, harness, slings and a chainsaw laid out for the morning gear inspection

    Control 02

    We check the gear every morning

    Ropes, slings, friction devices and saws get inspected and logged in the yard, so only sound gear reaches your tree.

  • Arborist sweeping wood chips off a driveway inside a coned exclusion zone after the job

    Control 03

    Ticketed crew, tidy handover

    A ticketed climber and ground crew member run the job, cone off the zone, then sweep the site so you get it back clean.

Genuinely local, fully covered

Real crew, real address in Jacksonville

Daniel Hartley started the crew in 2011 and still signs off every arborist report. Call the office, ask for the certificates, and book with confidence.

Where we work from
Arborist JacksonvilleJacksonville, Florida, United States
Talk to an arborist
(904) 337-5334hello@arboristjacksonville.com
When we answer
Mon to Sat, 7am to 6pmStorm and emergency calls, 24 hours
Cover we carry
General liability insuredFlorida workers' compensation coverage

Tickets and licenses we hold

  • ISA Certified Arborist. International Society of Arboriculture, current member
  • Tree Risk Assessment Qualified (TRAQ). Held by the arborist who writes your report
  • ANSI A300 pruning standards. Every cut follows the industry pruning standard
  • OSHA and ANSI Z133 compliant. Documented job briefings, rigging checks and PPE on every site
  • Licensed debris hauling and recycling. Chip and timber taken to a licensed recycling yard
ABN
on your quote and invoice
Waste hauling permit
on request
Liability policy
certificate emailed with your quote
Service area
Jacksonville, Florida

Check it yourself

We email the current certificates of currency with every quote, and we send them to your building manager or insurer on request.

Questions

Safety questions we get asked

Straight answers about paperwork, powerlines and who carries the risk.

Can I read your SWMS before you start?
Yes. Ask on the quote call and we email the SWMS with the written price, along with the certificates of currency for general liability and workers compensation.
What happens if the tree sits near powerlines?
We check the clearance distance first. Inside a No Go Zone we either hold the correct permit and use a spotter, or we book the work with the distributor. We never guess the clearance.
Who is liable if something gets damaged?
We are. We carry General liability insured and full OSHA Florida workers compensation, and we log photos before and after so a claim never turns into an argument.
Do you train apprentices on live jobs?
Apprentices work on the ground under a named ISA certified crew leader. Nobody climbs or runs a chainsaw above head height until they hold the ticket for it.

Step 2 · Tell us about the job

Ask for our SWMS and certificates

Send the form and we reply with the written quote, the SWMS and the current certificates of currency.

Tell us about the job

Indicates a required field

Privacy Guaranteed · No obligation

Call nowFree quote